Arke Stairs
More from EHT:

TREX® SEAL™ LEDGER TAPE

Trex Seal Ledger Tape

LOCK OUT MOISTURE WITH NEW TREX® SEAL LEDGER TAPE

11-inch Aluminum-lined Butyl Tape Protects Structural Integrity of Critical Connection Point

Ask any contractor where a deck is most likely to fail and, chances are, they’ll point to the ledger board. If not correctly installed and protected, this single element can be the downfall of a deck’s structure. With this in mind, the makers of Trex® RainEscape® have introduced Trex® Seal Ledger Tape, an 11”-wide aluminum-lined butyl tape specifically engineered for use on the ledger board of a deck.

“We surveyed professional deck builders and in almost every case they cited the ledger board as the primary source of deck failures,” said Dave Kile, founder of Trex® RainEscape®, which manufactures Trex RainEscape and Trex Seal products. “They were also unanimous in their feedback regarding the cause of ledger board failure – moisture.”

Easily one of wood’s worst enemies, moisture is a recurring theme across ledger board failures.

In most deck installations, there is a small gap left between the house and the deck that allows water to seep down and onto the ledger board, where it can collect and penetrate the wood, eventually leading to decay. Additionally, the natural expansion and contraction of wood over time can cause the ledger board to weaken, split and deteriorate.

Protecting the ledger board with proper flashing is critical for ensuring the structural integrity and longevity of a deck. However, because traditional metal flashing attaches to the home using nails or screws, water can still seep into screw holes and penetrate the wood, causing it to rot and the screws to rust. For waterproofing, flashing tape is substantially better since it is self-adhering and creates a tight seal on boards and around hardware.

Trex Seal, when used as part of a Trex RainEscape system installation, takes ledger flashing to a whole new level by combining the best performance features of metal and tape flashing in one easy-to-use product. Reinforced with an aluminum liner, the 11”-wide tape covers the entire surface of the ledger board and creates a seamless seal over any gaps between the ledger and deck substructure for optimal protection against moisture and water penetration.

Trex Seal expands the robust portfolio of offerings from the world’s leading brand of high-performance composite decking. Other products include Trex Protect Joist & Beam Tape, Trex® Protect Rim Joist Tape and the Trex RainEscape deck drainage system. All four products are designed to prevent moisture penetration and premature deterioration of wooden substructures and can be used with any decking material.

For more information about Trex Seal, visit https://trexseal.com.


Related Posts

EHT Newsletter

Sign up for the monthly EHT Newsletter including DIY tips, industry updates, trends, and more

Hot Product

The Oak 70.XTRA Spiral Staircase

The Oak 70.XTRA is an adjustable premier series spiral staircase that features solid Oak wooden stair treads and landing to complement and add style to any interior living space. The horizontal balusters and railing design, surrounding the full length of the staircase, is visually unique when compared to the traditional vertical baluster design of most […]

Read More >>

LOCK OUT MOISTURE WITH NEW TREX® SEAL LEDGER TAPE

11-inch Aluminum-lined Butyl Tape Protects Structural Integrity of Critical Connection Point

Ask any contractor where a deck is most likely to fail and, chances are, they’ll point to the ledger board. If not correctly installed and protected, this single element can be the downfall of a deck’s structure. With this in mind, the makers of Trex® RainEscape® have introduced Trex® Seal Ledger Tape, an 11”-wide aluminum-lined butyl tape specifically engineered for use on the ledger board of a deck.

“We surveyed professional deck builders and in almost every case they cited the ledger board as the primary source of deck failures,” said Dave Kile, founder of Trex® RainEscape®, which manufactures Trex RainEscape and Trex Seal products. “They were also unanimous in their feedback regarding the cause of ledger board failure – moisture.”

Easily one of wood’s worst enemies, moisture is a recurring theme across ledger board failures.

In most deck installations, there is a small gap left between the house and the deck that allows water to seep down and onto the ledger board, where it can collect and penetrate the wood, eventually leading to decay. Additionally, the natural expansion and contraction of wood over time can cause the ledger board to weaken, split and deteriorate.

Protecting the ledger board with proper flashing is critical for ensuring the structural integrity and longevity of a deck. However, because traditional metal flashing attaches to the home using nails or screws, water can still seep into screw holes and penetrate the wood, causing it to rot and the screws to rust. For waterproofing, flashing tape is substantially better since it is self-adhering and creates a tight seal on boards and around hardware.

Trex Seal, when used as part of a Trex RainEscape system installation, takes ledger flashing to a whole new level by combining the best performance features of metal and tape flashing in one easy-to-use product. Reinforced with an aluminum liner, the 11”-wide tape covers the entire surface of the ledger board and creates a seamless seal over any gaps between the ledger and deck substructure for optimal protection against moisture and water penetration.

Trex Seal expands the robust portfolio of offerings from the world’s leading brand of high-performance composite decking. Other products include Trex Protect Joist & Beam Tape, Trex® Protect Rim Joist Tape and the Trex RainEscape deck drainage system. All four products are designed to prevent moisture penetration and premature deterioration of wooden substructures and can be used with any decking material.

For more information about Trex Seal, visit https://trexseal.com.