Arke Stairs
More from EHT:

TG Tools Brad Point Drill Bits

The KIK® HS Brad Point Bit from TG Tools has a unique tip design allowing it to bore wood, plastics and sheet metals exceptionally fast, clean and easy. The tip contains 20% more cutting surface. To accommodate the speed with which this bit drills, the flutes have an additional extraction ridge to clear the bore continuously and efficiently. The tip design permits plastics, laminates and even acrylic sheet to be drilled without melting, clogging or melting. Sheet metals are drilled with no burr left behind. KIK HS Brad Point Bit are available in standard jobber lengths and 8-1/4 extended length. The extended lengths have a hole near the tip for pulling wires through the hole with the bit that made the hole! http://www.mytgtools.com

EHT Newsletter

Hot Product

Trex Seal Ledger Tape
TREX® SEAL™ LEDGER TAPE

LOCK OUT MOISTURE WITH NEW TREX® SEAL™ LEDGER TAPE 11-inch Aluminum-lined Butyl Tape Protects Structural Integrity of Critical Connection Point Ask any contractor where a deck is most likely to fail and, chances are, they’ll point to the ledger board. If not correctly installed and protected, this single element can be the downfall of a […]

Read More >>