Build a Window Box

 

 

 

 

 

 

 

Creative Curb Appeal for Window Gardens.

By Rob Robillard

There is much to say about the humble window box. As a low-tech garden and home beautifier, it is peerless! Fill it with a few bright flowering plants from your local nursery and, voilà, you look like a gardening wizard.

Window boxes can add an array of seasonal color and enhance the curb appeal of almost any structure. Window box gardening can be a fun and relaxing way to express your creativity or create a small garden in a cityscape.

I even know a guy in my neighborhood who grows his medicinal marijuana in a 3rd floor window box.

For the landless city dweller, window boxes provide a way to garden and even provide a source for seasonal herbs and vegetables.

Of course there are a few details to consider. It’s not simply a matter of getting any old box and nailing it to the window-sill. As with all home improvements, decisions must be made and certain materials and techniques are better than others.

History of the Window Box

The use of window boxes dates as far back as the first century B.C in ancient Rome where they were used to keep small gardens for cooking herbs, medicinal herbs, and flowers for rituals and decoration.

For repetitive production cutting, set stop blocks for the workpieces on your miter saw.
For repetitive production cutting, set stop blocks for the workpieces on your miter saw.

They were also seen among the lower classes, in small villas where peasants had little gardening space. Many people used window boxes to grow plants for food, medicine and religious uses.

Window boxes come in all shapes and sizes, from traditional wall-mounted window boxes to freestanding boxes and even indoor window boxes.

Build Your Own

This article will explain how to build a cedar window box and customize the dimensions to fit your desired window space. Window boxes are relatively easy projects. Because our  boxes were extra large, we added some features to the design that some folks may choose not to do. Either way, the project requires only a few tools to complete.

Before you get started here’s a few things to ask yourself:

  • What materials do you want your window box be made of?
  • How big does your window box need to be?
  • What height and depth is best for the plants that you want to pair with your home?

Material Choices

Name a construction material and no doubt someone, somewhere out here has made a window box out of it. Wood, plastic, zinc, copper, iron, tin, ceramic, terra cotta, wire, rubber tires, fiberglass—you name it, it’s been used. After you’ve selected the style you want, take a look at the materials available. If your windows get bright sun all day, it’s a good idea to avoid dark-colored or solid metal boxes, which could heat up and dry out your plants.

Cut all stock pieces at one time.
Cut all stock pieces at one time.

For my project, I chose 1×8 Cedar, mostly because the species is inherently insect and rot resistant. Additionally Cedar is lightweight, paints well, and has an attractive natural color if left unpainted.

The walls of the planter boxes feature a rabbet or groove to hold the bottom panels.
The walls of the planter boxes feature a rabbet or groove to hold the bottom panels.

Pine, Fir and Poplar all work, but simply do not last long in the elements, especially when you consider window boxes receive water almost daily.

The side panels all have the same groove.
The side panels all have the same groove.

Size and Depth

Window boxes can be constructed big or small, and both sizes have their advantages. Bigger boxes hold more soil and tend not to dry out as quickly, allowing you to plant perennial or more delicate plants. They also hold more plants, allowing you to create layers of color.

The front corners are mitered, and the miters include slots cut with a biscuit cutter.
The front corners are mitered, and the miters include slots cut with a biscuit cutter.

Shallower boxes are lighter, easier to lift, do not overpower a home’s architectural features, and are better suited for drought-tolerant plants. Window boxes this size are an excellent choice for planting annuals, herbs and artificial plants.

The slots in the corners hold wood biscuits to strengthen the joints.
The slots in the corners hold wood biscuits to strengthen the joints.

Once you’ve decided what types of plants you will use in the window boxes it’s time to measure your windows. Sometimes when determining box size, using a cardboard cutout taped in place can be a useful visual aid.

The biscuits are glued into the slots and bridge across each corner.
The biscuits are glued into the slots and bridge across each corner.

Generally speaking, window boxes are the same width or slightly smaller than the window they will be mounted beneath. If your home has shutters or wide exterior trim pieces, you may want your window boxes to run under those architectural features or sit slightly inside them. You may also choose to go smaller and center the box under the window. It depends on your aesthetical eye and the house décor.

Choosing a length that spans the full inside width of your window should give you a window box that looks right.

Assembly begins with one long wall and two side panels for each window box.
Assembly begins with one long wall and two side panels for each window box.

As far as height is concerned, you can follow a rule of thumb: the window box should be about 25 percent of the height of the window or 20 percent if the windows are very tall. It’s a good idea to measure your windows and run the numbers.

Dry-fit all the panels before final assembly.
Dry-fit all the panels before final assembly.

Window boxes should be a minimum of 8 inches in depth and 8 inches from front to back to have enough room for a selection of plants. Larger boxes, such as 12 inches in depth and width, are particularly better if you want to include a lot of plants, and want them to fill out enough to overflow the box.

Mounting Methods

During the design phase you should think about how you will mount your window box. There are several methods of mounting, which include but are not limited to:

  • Using structural screws
  • Small lag bolts
  • Combination of screws and brackets
  • Window box holders
The bottom panels are cut from rot-resistant PVC.
The bottom panels are cut from rot-resistant PVC.

French Cleat Hanger

A French cleat is way of securing window boxes and involves using two “cleat” boards, each with an opposing 45-degree bevel. One cleat is mounted to the wall and the other to the window box, which is lifted onto it. A French cleat typically adds an additional 3/4 inch to the depth or projection of the window box.

Tip: If the wall cleat is left slightly shorter than the window box cleat, you will have some left or right adjustment, after it is hung, for perfect positioning.

On the project shown we were able to mount securely to MDO plywood and pine trim with GRK structural screws. Paired top and bottom, and spaced approximately 16 inches apart, these screws are plenty strong to hold a fully loaded large window box.

Determining Joinery

Prior to building your boxes you need to think about how you will assemble them. Many simple boxes are constructed with butt joints and nails or screws.

Apply quality wood glue to all corner joints.
Apply quality wood glue to all corner joints.

You can choose this simple method or you can miter your corners to eliminate and hide the boards’ end grain. Mitering is a more refined finished carpentry look but should include some mechanical fastening in the form of biscuits or tenons.

Carefully assemble the corners tightly.
Carefully assemble the corners tightly.

Cutting Materials

If you’re lucky, all of your window boxes will be the same size, and cutting will be a matter of production-cutting repetitive size pieces.

For each window box you will need to cut two long parts, the exact length of the window bow, two side parts and a bottom. Each box has 5 parts to assemble plus your mounting preference.

Check each corner for square.
Check each corner for square.

Measure each 1-by-8-inch board twice, and mark the required lengths. Cut all required sections. If all of your window box parts are the same, consider setting up and using a stop block. Stop blocks allow you to make accurate, repetitive cuts time after time, eliminating the need to measure each piece of wood. This saves time and ensures consistency when many of the components need to be the exact same size.

Bottom Panel

Most people simply fasten the front, back and sides to the bottom panel, which is a simple and completely acceptable way to build a window box.

Drill drainage holes in the bottom panels.
Drill drainage holes in the bottom panels.

On our project, however, we used a dado cutter and cut 3/8-in. grooves in the front, back and two side panels. We chose to use a 1/2-in. PVC board as our bottom panel for rot-resistant longevity. The panel was routed with a rabbet bit so that it fit into and floated inside the cedar panel grooves. We left 3/16 of expansion room on all sides for expansion and contraction of materials. We liked this approach, because there are no mechanical fasteners holding this bottom panel in place that can rust.

The bottom panels are held loosely inside the groove of the surrounding panes to allow for expansion and contraction.
The bottom panels are held loosely inside the groove of the surrounding panes to allow for expansion and contraction.

Assembling the Window Box

If you’re assembling butt joints, simply assemble your front and back boards to the side pieces using galvanized or stainless steel 1/2-inch wood screws in pilot holes predrilled through the sides. If you prefer, you can use a countersink and fill the holes later with cedar wood plugs. To do this you will need a countersink bit and matching plug cutter. Plug cutters will work in a power drill but for consistently better results, use a drill press.

Cedbox16
Use plenty of clamps to hold the assembly together while the glue sets up.

On our window boxes we mitered the front two joints. We used a biscuit cutter to cut matching biscuits in each piece of wood, inserted the biscuits with waterproof glue and then clamped the boxes tight overnight.

Finish nails help close the corners during glue-up.
Finish nails help close the corners during glue-up.

I also added some 16-gauge stainless steel nails to the mitered joints.

We used a tenon cutter to secure the back board to the two sides of our window box. Tenons are extremely strong and are used to join two mating mortises. These parts were also glued, clamped and pinned with finish nails. All nail holes were later filled and sanded.

If you decided on using a French cleat, this would be the time to install the cleat to the rear of the box.

Drainage Holes

It’s absolutely necessary that a window box have drainage holes so plants do not sit in soggy soil. We drilled 3/8-inch drainage holes in several places along bottom board of each window box. The number or pattern is up to you, but drill one hole roughly every six square inches to give water plenty of room to escape.

Watering Tip: Water plants in the window box until you see water dripping out the bottom drain holes.

Finishing

We filled all nail holes, then sanded and primed all exposed wood with a quality oil primer. The window boxes were finished with two coats of latex top paint.

Mounting

As mentioned earlier there are several ways to mount a window box, from fasteners, cleats or a pair of window box brackets.

The first method is direct mounting, where the back wall of the window box is pre-drilled with holes and permanently secured in place with a fastener. The second is cleat mounting, where you attach a long, sturdy cleat to your wall and then hang the window flower box from the cleat. The advantage to using a cleat is you can easily lift the window box off for replanting or winter storage. The third is using brackets, which usually involve a combination of direct mounting and bracket support. This is a useful (and many times necessary) method when the window box is large and heavy.

The best choice will depend on the materials, design and construction of your window box and mounting needs of your house.

On our project we predrilled holes and mounted our window boxes and used 6-8 RSS structural screw fasteners from GRK Fasteners. The RSS Screws are weather-resistant and made from case-hardened steel with high tensile, torque and shear strength.

Planting in a Window Box

Fill the window box with a 1- to 2-inch layer of gravel in the bottom of the window box to allow excess water to drain. Cover the gravel with potting soil, filling the box to about an inch from top.

We purchased plastic planters for our cedar window box rather than planting directly. If you do this you may want to buy the planters first to determine your window box depth, width and length. The plastic liners we purchased ended up being smaller than our window boxes.

Here are the assembled window boxes, awaiting finish and installation.
Here are the assembled window boxes, awaiting finish and installation.

The advantage of using plastic planters is so you can lift the planter out of the box to change soil or plants. This method is best for second-story windows or any window too high to get to from the ground.

Choose plants that are tall and spiky for the center, surround them with round and full plants that cascade around or over the window box edge. Place larger flowers or plants in the rear of the box. Plants in window boxes, like those in any container garden, are subject to more dryness and heat than plants in the ground, so it helps to purchase nursery packs of young plants that will adapt directly to the box and suffer less transplant shock. Replant your window boxes seasonally.

From simple to ornate, traditional to contemporary and rustic to elegant, window box planters cover a large range of materials, sizes and styles that will fit your home’s décor or your personal style.

Why be ordinary when you can be extraordinary? Get building and start planting a small place to grow!

These window boxes were mounted with RSS Structural Screws from GRK Fasteners, which include a washer-style pan head for reliable holding power.
These window boxes were mounted with RSS Structural Screws from GRK Fasteners, which include a washer-style pan head for reliable holding power.

Hot Product

fence trac
FenceTrac Fence Systems

FenceTrac is a revolutionary fence system that uses patented U-channel rails and metal posts to create a secure and sturdy frame for any type of infill. You can choose from wood, vinyl, composite, bamboo, metal, or any other material that fits your style and budget. You can also mix and match different infills to create […]

Read More >>